DRV103H/2K5
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 100kHz |
| Base Part Number | DRV103 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 1 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Switch Type | Relay, Solenoid Driver |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~32V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 3.5A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV103H/2K5 Overview
It is packaged in the form of a Tape & Reel (TR).The 8-PowerSOIC (0.154, 3.90mm Width) package includes it.The lighting driver has the mounting type Surface Mount.It owns Relay, Solenoid Driver switch type.The temperature should be set to -55°C~125°C TA to ensure reliable functioning.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Features of the lighting driver are Internal PWM, Status Flag.The DRV103 family contains this object.It contains 8 terminations.The operation is carried out using the 8 pins.It contains 1 functions.This operation requires the maximum output current to be decreased to 3A.It is possible to achieve a high level of efficiency with a supply voltage of 24V.There are 8 pins in total on this board.In this case, the output current is set to 3A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.Vsup (maximum supply voltage) is set to 32V.It is recommended that the supply voltage be set at 24V in order to achieve maximum efficiency.Drivers for this part number 1 are available.
DRV103H/2K5 Features
Supplied from 24V
DRV103H/2K5 Applications
There are a lot of Texas Instruments DRV103H/2K5 Power Switches ICs applications.
- Portable GPS
- HDD, SSD
- Wireless/Networking Cards
- Wearable Devices
- USB3.1 Power Delivery
- PDAs
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Gaming
- Hard Disk Drives