DRV101F/500
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Internal PWM, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 29kHz |
| Base Part Number | DRV101 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Bipolar |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 60V |
| Interface | On/Off |
| Current - Output (Max) | 1.9A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2.3A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.44mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV101F/500 Overview
The LED driver's packaged as a Tape & Reel (TR).Package TO-263-8, D2Pak (7 Leads + Tab), TO-263CA contains it.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is Relay, Solenoid Driver.Keeping the temperature at -55°C~125°C TA ensures reliable operation.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of Bipolar volts.Internal PWM, Status Flag features are available on the lighting driver.It is a member of the DRV101 family.It contains 7 terminations.7 pins are used for operation.It contains 1 functions.From the lighting driver, there is a maximum output of 1.9AV.Supply voltages of 24V allow for high efficiency.This LED driver is equipped with a total of 7 pins.In this case, the output current will be set to 2.3A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The lighting driver is configured to have a maximum supply voltage of 60V (Vsup).When using this LED driving board, it is recommended that the supply voltage is set to 24V.
DRV101F/500 Features
Supplied from 24V
DRV101F/500 Applications
There are a lot of Texas Instruments DRV101F/500 Power Switches ICs applications.
- Hot Swaps
- Set-Top Boxes
- Notebook PC
- Set-top-box
- Portable/Handheld Devices
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Notebook and Tablet Computers
- USB Power Distribution
- PC Cards