DRF1201
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Lifecycle Status | IN PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-SMD Module |
| Surface Mount | YES |
| Number of Pins | 10 |
| Packaging | Bulk |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN SILVER COPPER |
| Max Power Dissipation | 1.1mW |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 8A |
| Interface | On/Off |
| Max Supply Voltage | 15V |
| Min Supply Voltage | 10V |
| Current - Output (Max) | 26A |
| Output Configuration | Low Side |
| Output Current | 8A |
| Propagation Delay | 35 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Switch Type | General Purpose |
| Rise Time | 5ns |
| Fall Time (Typ) | 5 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~15V |
| Output Peak Current Limit-Nom | 8A |
| Rds On (Typ) | 550m Ω |
| Drain to Source Resistance | 550mOhm |
| High Side Driver | YES |
| Height | 300μm |
| Length | 1.5mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
DRF1201 Overview
A Bulk is used to package it.There is a package for it in the 10-SMD Module package.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.There is a default setting of 1 for output.The maximum output voltage is N-Channel volts.It has a total of 10 terminations.The 10 pins are used to operate the LED driver.The LED driver has 1 functions.This lighting driver is capable of delivering a maximum output of 26A volts.This operation requires the maximum output current to be decreased to 8A.This results in a 8A output current.15VV is the maximum supply voltage it can handle.If required, it can operate at 10V volts as well.
DRF1201 Features
DRF1201 Applications
There are a lot of Microsemi Corporation DRF1201 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Portable Devices
- USB Power Distribution
- Wearable Devices
- Notebook and Tablet Computers
- Smartphone and PDA
- Portable GPS
- Portable GPS Device
- Hot Swap
- Hot-Swap Systems