DM74LS273WM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | 74LS273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 30MHz |
| Current - Output High, Low | 400μA 8mA |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
DM74LS273WM Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. It is included in the package Tube. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. Currently, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. In FPGA terms, D flip flop is a type of 74LSseries FPGA. It should not exceed 30MHzin terms of its output frequency. A total of 1elements are present in it. The object belongs to the 74LS273 family.
DM74LS273WM Features
Tube package
74LS series
DM74LS273WM Applications
There are a lot of ON Semiconductor DM74LS273WM Flip Flops applications.
- Divide a clock signal by 2 or 4
- Patented noise
- High Performance Logic for test systems
- Set-reset capability
- Buffer registers
- Individual Asynchronous Resets
- QML qualified product
- Storage registers
- Guaranteed simultaneous switching noise level
- Registers