DM74AS574WM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74AS574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 80MHz |
| Current - Quiescent (Iq) | 116mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
DM74AS574WM Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The supply voltage is set to 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74ASseries FPGA. Its output frequency should not exceed 80MHz. The element count is 1 . As a result, it consumes 116mA quiescent current. This D latch belongs to the family of 74AS574.
DM74AS574WM Features
Tube package
74AS series
DM74AS574WM Applications
There are a lot of ON Semiconductor DM74AS574WM Flip Flops applications.
- Count Modes
- Buffer registers
- Convert a momentary switch to a toggle switch
- Automotive
- Synchronous counter
- Memory
- Guaranteed simultaneous switching noise level
- Safety Clamp
- Shift Registers
- Data storage