DM74AS374WM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | AS |
| Current - Quiescent (Iq) | 120mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
DM74AS374WM Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. Currently, the output is configured to use Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. Temperature is set to 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74AS series. Its output frequency should not exceed 125MHz Hz. A total of 1elements are present in it. There is 120mA quiescent consumption. There have been 20 terminations. Power is provided by a 5V supply. It belongs to the family of electronic devices known as AS. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. The flip flop has 2embedded ports.
DM74AS374WM Features
Tube package
74AS series
DM74AS374WM Applications
There are a lot of Rochester Electronics, LLC DM74AS374WM Flip Flops applications.
- Shift Registers
- Buffer registers
- Digital electronics systems
- Clock pulse
- Buffered Clock
- 2 – Bit synchronous counter
- Load Control
- Single Up Count-Control Line
- Memory
- Balanced Propagation Delays