DM74ALS534WM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 19mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
DM74ALS534WM Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. This output is configured with Tri-State, Inverted. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to 0°C~70°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74ALS series. It should not exceed 35MHzin its output frequency. The element count is 1 . There is a consumption of 19mAof quiescent energy. The number of terminations is 20. A voltage of 5V is used as the power supply for this D latch. It belongs to the family of electronic devices known as ALS. 5.5Vis the maximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 4.5V. There are 2 ports embedded in the flip flops.
DM74ALS534WM Features
Tube package
74ALS series
DM74ALS534WM Applications
There are a lot of Rochester Electronics, LLC DM74ALS534WM Flip Flops applications.
- 2 – Bit synchronous counter
- Asynchronous counter
- Supports Live Insertion
- Common Clocks
- CMOS Process
- Latch
- Dynamic threshold performance
- Individual Asynchronous Resets
- Frequency Dividers
- ATE