DM74ALS374SJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ALS374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 35MHz |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
DM74ALS374SJ Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. A temperature of 0°C~70°C TAis used in the operation. There is D-Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74ALS series. This D flip flop should not have a frequency greater than 35MHz. D latch consists of 1 elements. As a result, it consumes 19mA quiescent current. JK flip flop belongs to 74ALS374 family.
DM74ALS374SJ Features
Tube package
74ALS series
DM74ALS374SJ Applications
There are a lot of ON Semiconductor DM74ALS374SJ Flip Flops applications.
- Storage registers
- Divide a clock signal by 2 or 4
- Modulo – n – counter
- Count Modes
- Common Clocks
- Load Control
- Balanced 24 mA output drivers
- Digital electronics systems
- Storage Registers
- Shift Registers