DM74ALS273SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74ALS273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Number of Bits | 1 |
| Clock Frequency | 35MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2 ns |
| Family | ALS |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20mA |
| Current - Output High, Low | 2.6mA 24mA |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 35 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS273SJX Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. The output it is configured with uses Non-Inverted. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. 0°C~70°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74ALS series. It should not exceed 35MHzin its output frequency. In total, it contains 1 elements. Despite external influences, it consumes 20mAof quiescent current. Currently, there are 20 terminations. This D latch belongs to the family of 74ALS273. It is powered by a voltage of 5V . An electronic device belonging to the family ALScan be found here. This electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. It is designed with a number of bits of 1. Its superior flexibility is attributed to its use of 8 circuits. If high efficiency is desired, the supply voltage should be kept at 5V.
DM74ALS273SJX Features
Tape & Reel (TR) package
74ALS series
20 pins
1 Bits
DM74ALS273SJX Applications
There are a lot of ON Semiconductor DM74ALS273SJX Flip Flops applications.
- Clock pulse
- Modulo – n – counter
- Synchronous counter
- Data Synchronizers
- Single Up Count-Control Line
- Memory
- ESCC
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Registers