DG9232DY
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Reach Compliance Code | unknown |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Power Dissipation | 400mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 75 ns |
| Number of Inputs | 2 |
| Supply Type | Single |
| Turn-Off Delay Time | 50 ns |
| On-State Resistance (Max) | 30Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF 13pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 75ns, 50ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Drain to Source Resistance | 30Ohm |
| Normal Position | NO |
| Height | 1.55mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
DG9232DY Overview
Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. 8 terminations have been made so far. It is injected into the electrical part body with 8 pins. Unlike digital switches, these are based on SPST - NC switching circuits. There is 30Ohm internal resistance in this digital multiplexer. The datasheets for the 8 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2.7V. This analog switch requires a voltage of 2.7V~12V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical component supports 2 inputs. This electronic component presents a Drain to Source resistance of 30Ohm.
DG9232DY Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 30Ohm
DG9232DY Applications
There are a lot of Vishay Siliconix DG9232DY Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Wireless Local Loop
- Audio and video routing
- Cable PC
- 65 V DACs
- Digital Cross-Connects
- Precision data acquisition
- SDH/SONET multiplexers
- Modems
- Power routing