DG407DN+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DG407 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 65pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Width | 11.505mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG407DN+T Overview
Due to its 28-LCC (J-Lead) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 28. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. This electronic part can be found in the 28 series. There are 2 circuits in this multiplexer. Try searching with DG407 if you're looking for variants. It is a typical Multiplexer or Switches analog multiplexer. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.
DG407DN+T Features
8 Channels
DG407DN+T Applications
There are a lot of Maxim Integrated DG407DN+T Analog Switches & Multiplexers ICs applications.
- ATM
- FTTH
- Digital Cross-Connects
- Avionics and Military Systems
- Frame Relay Equipment
- Precision data acquisition
- Routers
- Power routing
- Battery-powered systems
- Sample-and-hold systems