DG406DN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-J28 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| On-state Resistance Match-Nom | 1.5Ohm |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Signal Current-Max | 0.02A |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
DG406DN Overview
Shipping overseas is convenient due to the electrical component's packing in 28-LCC (J-Lead). To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Surface Mount. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, 28 terminations have occurred. This electronic part offers high-quality output due to its 16 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. There are 28 pins injected into the electronic part body. There are 1 circuits in this multiplexer. In this analog multiplexer, the value is Multiplexer or Switches. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
DG406DN Features
16 Channels
DG406DN Applications
There are a lot of Maxim Integrated DG406DN Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- PDAs
- Imaging
- Communication systems
- Cable Modem
- Avionics and Military Systems
- Cell phones
- T1/E1 Terminals
- Cable PC
- Power routing