DG3538DB-T5-E1
| Parameters | |
|---|---|
| Max Power Dissipation | 400mW |
| Base Part Number | DG3538 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1nA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 46 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 37 ns |
| -3db Bandwidth | 360MHz |
| On-State Resistance (Max) | 3.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 8pF |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 41ns, 37ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 200mOhm (Max) |
| Crosstalk | -66dB @ 10MHz |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 21 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFBGA |
| Number of Pins | 8 |
| Supplier Device Package | 8-MicroFoot™ (1.5x1.5) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 4Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
DG3538DB-T5-E1 Overview
As the electronic part is packed in 8-WFBGA, international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. A total of 2 circuits make up this switch device. Look for analog switch ic variants by searching with DG3538. This digital multiplexer has 4Ohm internal resistance. To find out what the functions of 8 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. 1.8V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 1nA. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. Temperatures over 85°C should not be allowed for the multiplexer to operate. Suppliers offer the 8-MicroFoot? (1.5x1.5) package.
DG3538DB-T5-E1 Features
Switch Circuit: SPST - NO/NC
1nA Supply Current
-3db Bandwidth: 360MHz
DG3538DB-T5-E1 Applications
There are a lot of Vishay Siliconix DG3538DB-T5-E1 Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- High reliability control systems
- E1 Network Equipment
- Medical systems
- Remote Powered Equipment
- CSU
- Mechanical reed relay replacement
- MP3 players
- Imaging
- T1/E1 Terminals