DG301ACWE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | DG301A |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 25V |
| Operating Supply Current | 230μA |
| Nominal Supply Current | 230μA |
| Max Supply Current | 500μA |
| Turn On Delay Time | 300 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG301ACWE+T Overview
Presented in 16-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. This electrical component is included in the 16 series of products. Unlike digital switches, these are based on SPDT switching circuits. A total of 1 circuits make up this switch device. Using the DG301A search parameter, you can discover variants of the switch. There is 50Ohm internal resistance in this digital multiplexer. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. For this digital switch to work, 230μA current would suffice. A voltage higher than 500μA may cause damage to the switch multiplexer. For this multiplexer, dual supply voltage is feasible, but it should not exceed 18V. For dual power supplies, a voltage of at least 5V should be attached. The electronic component can function from 15V.
DG301ACWE+T Features
1 Channels
Switch Circuit: SPDT
230μA Supply Current
DG301ACWE+T Applications
There are a lot of Maxim Integrated DG301ACWE+T Analog Switches & Multiplexers ICs applications.
- Avionics
- MP3 players
- Battery Powered Instruments
- Data switching
- Microprocessor controlled systems
- Remote wireless modules
- Audio signal routing
- PDAs
- Fiber In The Loop (FITL)
- Sample-and-hold systems