DG183AP/883
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Reach Compliance Code | unknown |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Circuits | 2 |
| Power Dissipation | 900mW |
| Number of Inputs | 4 |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 10Ohm |
| Min Dual Supply Voltage | 10V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 21pF 17pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±15V |
| Radiation Hardening | Yes |
| RoHS Status | Non-RoHS Compliant |
DG183AP/883 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 14. A key feature of the 16 series is the inclusion of this electronic part as part of its design. On the other hand, analog switches can be constructed using DPST - NO switching circuits. This multiplexer is composed of 2 circuits. The internal resistance of this digital multiplexer is 10Ohm. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 18V. If you are using a dual power supply, you should attach at least 10V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Operating 4 inputs is required.
DG183AP/883 Features
Switch Circuit: DPST - NO
DG183AP/883 Applications
There are a lot of Vishay Siliconix DG183AP/883 Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- DSLAMs
- Communication systems
- FTTH
- Cell phones
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Digital access cross connects
- PDH Multiplexers
- High speed data transmission line cards
- HDTV