CY74FCT574ATSOCG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CY74FCT574ATSOCG4 Overview
It is packaged in the way of SOIC. D latch consists of 1 elements. 20terminations have occurred. The power source is powered by 5V. The electronic device belongs to the FCTfamily. It is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device has the base part number Bus Driver/Transceiver. In view of its reliability, this D flip flop is a good fit for TUBE. A power supply of 5Vis required to operate it. The D flip flop has no ports embedded. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. -32mA is set as the high level output current. A 64mAvalue is set for low-level output current. The operating temperature should be lower than 85°C. Operating temperatures should be above -40°C. The system operates with a minimum supply voltage of 4.75V. In this case, it supports a maximum supply voltage of 5.25V. It is possible to obtain a frequency of 250MHz. It uses BUS DRIVERas its logic IC. A total of 1 functions are provided by this T flip flop. The JK flip flop has a pin count of 20. The 64mA output current allows it to be designed with the greatest amount of flexibility.
CY74FCT574ATSOCG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
CY74FCT574ATSOCG4 Applications
There are a lot of Texas Instruments CY74FCT574ATSOCG4 Flip Flops applications.
- Storage registers
- Buffer registers
- Balanced 24 mA output drivers
- Data Synchronizers
- Divide a clock signal by 2 or 4
- Single Up Count-Control Line
- Digital electronics systems
- ESD performance
- High Performance Logic for test systems
- ESCC