CY74FCT2373CTQCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2373CTQCTE4 Overview
A package called 20-SSOP (0.154, 3.90mm Width) contains it. A package of Tape & Reel (TR) has been used. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A 4.75V~5.25V supply voltage is required to operate it. The operating temperature is -40°C~85°C. This FPGA is part of the 74FCT series. It is designed with 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74FCT2373 family. In order to operate it, the supply voltage must be 5V. 20 pins are included. There is a device in this electronic family called FCT. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the method used for mounting this electronic part. In this device, there are 2 ports. The part is in the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.25V. A total of 5V power supplies are needed to run it. There should be a voltage supply (Vsup) greater than 4.75V. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Its output current of 12mA ensures maximum design flexibility. Input lines are converted into binary equivalents by 8 output lines. It consumes 100μA of quiescent current without being affected by outside factors.
CY74FCT2373CTQCTE4 Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
CY74FCT2373CTQCTE4 Applications
There are a lot of Texas Instruments CY74FCT2373CTQCTE4 Latches applications.
- Ring counter
- Shift register
- Up-Down Johnson
- Pattern Generators
- Avionics
- Counter control
- Digital bus buffer
- Parallel Output
- Clocks
- Counter timers