CY74FCT162374CTPVC
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT162374CTPVC Overview
The flip flop is packaged in 48-BSSOP (0.295, 7.50mm Width). You can find it in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. In total, it contains 2 elements. As a result, it consumes 500μA quiescent current and is not affected by external forces. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74FCT162374 family contains this object. It is powered from a supply voltage of 5V. A JK flip flop with a 4.5pFfarad input capacitance is used here. Electronic devices of this type belong to the FCTfamily. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 48 pins. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 16bits in its design. There are 5V power supplies attached to it. The D flip flop is embedded with 2ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With a current output of 24mA , it offers maximum design flexibility. It has 3 output lines to operate. It consumes a total of 5μA quiescent current at any given time.
CY74FCT162374CTPVC Features
Tube package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT162374CTPVC Applications
There are a lot of Texas Instruments CY74FCT162374CTPVC Flip Flops applications.
- Bus hold
- Memory
- Bounce elimination switch
- Safety Clamp
- Load Control
- Data Synchronizers
- Functionally equivalent to the MC10/100EL29
- Latch-up performance
- Power down protection
- Shift registers