CY29FCT520BTSOCE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | DSP Peripherals |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| uPs/uCs/Peripheral ICs Type | DSP PERIPHERAL, PIPELINE REGISTER |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Bits per Element | 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| High Level Output Current | -32mA |
| External Data Bus Width | 8 |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Output Data Bus Width | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CY29FCT520BTSOCE4 Overview
There is a SOIC package embedded with the device. The number of the chip's terminations sums up to 24. There is 5V operating supply voltage listed on the part. On this part, there are 1 elements. 24 pins are present on the device. It is recommended to mount by Surface Mount. It is noted that the operating supply voltage of this chip falls within the range 5V. Voltage can be delivered at 5V by the device. 24 pins are on it. Under 85°C, it is recommended that it be used. This device should not be operated with a value lower than -40°C. Under 5.25V, this voltage is employed. Voltages higher than 4.75V are used for this supply. It belongs to the subcategory of DSP Peripherals.
CY29FCT520BTSOCE4 Features
With 24 pins
Operate supply voltage at 5V
It supplies 5V power
CY29FCT520BTSOCE4 Applications
There are a lot of Texas Instruments CY29FCT520BTSOCE4 Shift Registers applications.
- Pulse Extenders
- ROM Chips
- Remote control holding register
- Sequence generator
- Data manipulation
- Generate time delay toward digital circuits
- store data in digital form
- Data Processors
- Pseudo Random Pattern Generator
- Delay Line