CY29FCT520ATSOCG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | DSP Peripherals |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| uPs/uCs/Peripheral ICs Type | DSP PERIPHERAL, PIPELINE REGISTER |
| Propagation Delay | 14 ns |
| Number of Bits per Element | 8 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| High Level Output Current | -32mA |
| External Data Bus Width | 8 |
| Low Level Output Current | 64mA |
| Output Data Bus Width | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CY29FCT520ATSOCG4 Overview
SOIC is the package in which the device is embedded. Taking the total number of terminations on the chip and adding them up, we get 24. The part operates at 5V voltage. There are 24 pins on the device. Using Surface Mount as a mount point is recommended. According to the specification, this chip's operating supply voltage falls within the range of 5V. There is a possibility of delivering voltage at 5V. There are a total of 24 pins on it. It should be used below 85°C. It should not be lower than -40°C to operate this device. This supply voltage is employed under 5.25V. There is a voltage applied to the supply that is greater than 4.75V. Its subcategory belongs to DSP Peripherals. 1 circuits are present in this device.
CY29FCT520ATSOCG4 Features
With 24 pins
Operate supply voltage at 5V
It supplies 5V power
CY29FCT520ATSOCG4 Applications
There are a lot of Texas Instruments CY29FCT520ATSOCG4 Shift Registers applications.
- Pseudo Random Pattern Generator
- Output expansion
- Parallel to serial converter
- Sequence generator
- Flash Memory
- temporary data storage
- Serial-to-parallel data conversion
- Pulse Extenders
- Counter
- Remote control holding register