CSD96371Q5M
| Parameters | |
|---|---|
| Fault Protection | Shoot-Through, UVLO |
| Drain to Source Breakdown Voltage | 25V |
| Output Voltage-Max | 5.5V |
| Load Type | Inductive |
| Height | 1.5mm |
| Length | 6mm |
| Width | 5mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 22-PowerLFDFN |
| Number of Pins | 22 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | NexFET™ |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 22 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Synchronous Buck Converters |
| HTS Code | 8541.29.00.95 |
| Subcategory | Switching Regulator or Controllers |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CSD96371 |
| Qualification Status | Not Qualified |
| Max Output Current | 75A |
| Input Voltage-Nom | 12V |
| Interface | PWM |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Half Bridge |
| Power Dissipation | 12W |
| Input Voltage (Min) | 3.3V |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 13.2V |
| Output Current per Channel | 50A |
| Control Technique | PULSE WIDTH MODULATION |
| Continuous Drain Current (ID) | 50A |
| Gate to Source Voltage (Vgs) | 10V |
| Voltage - Load | 3.3V~13.2V |
| Switching Frequency-Max | 2000kHz |
CSD96371Q5M Overview
H bridge is packaged using Tape & Reel (TR).For cost-saving purposes, H bridge is included in the 22-PowerLFDFN package.In addbridge driverion, 4.5V~5.5V can be used to improve reliabilbridge drivery.In Surface Mount, H bridge circuit is mounted.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.Among H bridge motor drivers many applications are Synchronous Buck Converters.In order to mount H gate on the PCB, Surface Mount is used.H gates specific characteristics also include Bootstrap Circuit.22 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.As H bridge ic of the signal interface, 22 pins are used as pronged contacts.In addition to the CSD96371 H bridge ic number, more related H bridge ics can be located by using its base H bridge ic number.H bridge circuit is incorporated with SWITCHING REGULATOR as its analog IC type.A H-bridge belonging to the NexFET? series, it is an electronic H-bridge.An ambient temperature of 75A enables a power supply to provide a maximum load current.Under the subcategory of Switching Regulator or Controllers, this H bridge motor driver shares various similarities with other parts.
CSD96371Q5M Features
Available in 22-PowerLFDFN Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : CSD96371
CSD96371Q5M Applications
There are a lot of Texas Instruments CSD96371Q5M Full Bridge Drivers, Half-Bridge Drivers applications.
- Networking Microprocessor Voltage Regulators
- Notebook Computers
- Bipolar stepper motor
- Industrial Automation
- Industrial Fans
- Industrial Pumps
- High-Performance Gaming Motherboards
- Desktop Computers
- DVD players
- V-Core