CPC7595MCTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VDFN Exposed Pad |
| Number of Pins | 28 |
| Supplier Device Package | 28-DFN |
| Operating Temperature | -40°C~110°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 110Ohm |
| Max Operating Temperature | 110°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 10.5mW |
| Max Power Dissipation | 10.5mW |
| Voltage - Supply | 4.5V~5.5V |
| Function | Line Card Access Switch |
| Operating Supply Voltage | 5V |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2mA |
| Max Supply Current | 1μA |
| Current - Supply | 2mA |
| RoHS Status | RoHS Compliant |
CPC7595MCTR Overview
In order to save space on the board, 28-VDFN Exposed Pad packages are used.In order to pack telecommunications equipment, Tape & Reel (TR) is used.There is a type Surface Mount mount for this telecom circuit.1 circuits make up this telecom IC .Improved efficiency can be ensured when the supply voltage of 4.5V~5.5V is provided.Reliable performance can be offered when the operating temperature is set at -40°C~110°C.Telecom switching is mounted in a Surface Mount-direction.28 pins are located on this telecom interface.A 2mA-volt supply current is used to operate telecom equipment .For designers, telecom product offers a great deal of flexibility by operating on the 5V supply voltage.Telecom product operates with 2mA's supply current to give designers a lot of flexibility.Temperature should be set at the minimum value of -40°C to ensure normal operation.It is necessary to set the temperature at the maximum value of 110°C for the telecom IC to function normally.At least 4.5V voltage should be supplied.If 5.5V is higher than the supplied voltage, telecommunications device should be lower.Normal operation requires a supply current of 1μA.As long as the resistance is greater than 110Ohm, it will be able to work.
CPC7595MCTR Features
Available in the 28-VDFN Exposed Pad package
Operating supply voltage of 5V
Operating supply current of 2mA
CPC7595MCTR Applications
There are a lot of IXYS Integrated Circuits Division CPC7595MCTR Telecom applications.
- CSU/DSU E1 Interface
- CSU/DSU E1/T1/J1 Interface
- Short/Medium Loop
- Intelligent PBX
- Network Multiplexing and Terminating Equipment
- E1 Rates PCM Line Interface
- Cable modem
- E3/DS3 Access Equipment
- Digital Cross Connect Systems
- Inverse Multiplexing for ATM (IMA) Wireless Base Stations