CD74HCT597EE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 56 ns |
| Turn On Delay Time | 84 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HCT597EE4 Overview
There is an embedded device in the package PDIP. A total of 16 terminations can be found on the chip. It is used to pack in Rail/Tube case. 5V is the part's operating supply voltage. A total of 1 elements can be found on this part. In this device, there are 16 pins. As a general recommendation, mounting by Through Hole is recommended. The electronic component belongs to the HCT. According to the specification, this chip's operating supply voltage falls within the range of 5V. The following additional elements are important to note: SISO OPERATION ALSO AVAILABLE. There are 9 input lines available in the device. Voltage can be delivered at 5V. A total of 8 bits are present on an IC chip. 16 pins are present on it. It is recommended that it be used at temperatures below 125°C. For this device to operate, it cannot be lower than -55°C. A voltage of this type is employed under 5.5V. It is used at a voltage greater than 4.5V.
CD74HCT597EE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
CD74HCT597EE4 Applications
There are a lot of Texas Instruments CD74HCT597EE4 Shift Registers applications.
- Pseudo Random Pattern Generator
- Flash Memory
- ROM Chips
- Serial-to-parallel data conversion
- Interconnectors
- Pulse Extenders
- Remote control holding register
- data manipulation
- 8-bit data storage
- Output expansion