CD74HCT299MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 2/6V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 69 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 69 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 4mA |
| Low Level Output Current | 4mA |
| Number of Input Lines | 10 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT299MG4 Overview
The device is embedded in SOIC package. This chip has a total termination count of 20. A Rail/Tube case is used to pack it. A voltage of 5V is specified for the part's operating supply. 20 pins are provided on the device. It is recommended that the mount should be done by Surface Mount. An electronic component is included in the HCT. In terms of supply voltage, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: COMMON I/O PINS; GATED OUTPUT CONTROL. The device has 10 input lines. It can deliver voltage at 2/6V. There are 8 bits in the IC chip. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. For this device to work, it should not go below -55°C. This supply voltage is employed under 5.5V. It is important to note that this supply voltage is higher than 4.5V. 8μA is the quiescent current. 1 circuits are present in this device.
CD74HCT299MG4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 2/6V power
Quiescent Current at 8μA
CD74HCT299MG4 Applications
There are a lot of Texas Instruments CD74HCT299MG4 Shift Registers applications.
- Remote control holding register
- Delay Line
- data transfer
- 8-bit data storage
- Serial-to-parallel data conversion
- ROM Chips
- Remote control holding register
- Pattern Recognizers
- Counter
- Parallel data