CD74HCT299M96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 45 ns |
| Turn On Delay Time | 69 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 4mA |
| Low Level Output Current | 4mA |
| Number of Input Lines | 10 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HCT299M96E4 Overview
SOIC is the package in which the device is embedded. Taking the total number of terminations on the chip and adding them up, we get 20. The case Tape and Reel contains it. 5V is the part's operating supply voltage. Devices with 20 pins are available. As a general recommendation, mounting by Surface Mount is recommended. Electronic components fall under the category of HCT. According to the specification, this chip's operating supply voltage falls within the range of 5V. The following additional elements are important to note: COMMON I/O PINS; GATED OUTPUT CONTROL. There are 10 input lines available in the device. Voltage can be delivered at 5V by the device. A total of 8 bits are present on the IC chip. The total number of pins is 20. At temperatures below 125°C, it is recommended for use. In order to operate the device, the value should not fall below -55°C. Under 5.5V, this voltage is employed. It is important to note that this supply voltage is higher than 4.5V. There are 1 circuits in this device.
CD74HCT299M96E4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
CD74HCT299M96E4 Applications
There are a lot of Texas Instruments CD74HCT299M96E4 Shift Registers applications.
- Pulse Extenders
- 7-segment display control
- temporary data storage
- Serial-to-parallel data conversion
- Remote control holding register
- data manipulation
- Pattern Recognizers
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Output expansion