CD74HCT299EE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 45 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 69 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 4mA |
| Low Level Output Current | 4mA |
| Number of Input Lines | 10 |
| Length | 25.4mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT299EE4 Overview
PDIP package contains the device. 20 is the number of terminations on the chip. This item is packed in case Rail/Tube. This part has an operating supply voltage of 5V. Devices with 20 pins are available. Through Hole is recommended for mounting. Electronic components are categorized as HCT. A range of 5V is noted as the operating supply voltage of this chip. This section has the following additional features: COMMON I/O PINS; GATED OUTPUT CONTROL. In this device, there are 10 input lines. It can deliver voltage at 5V. The total number of IC chip bits is 8. 20 pins are present on it. A temperature below 125°C is recommended for its use. In order to operate the device, the value should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. It is used at a voltage greater than 4.5V. There is a quiescent current of 8μA running through it. In this device, there are 1 circuits that are active at the same time.
CD74HCT299EE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
Quiescent Current at 8μA
CD74HCT299EE4 Applications
There are a lot of Texas Instruments CD74HCT299EE4 Shift Registers applications.
- 7-segment display control
- Interconnectors
- LED matrix control
- Serial-to-parallel data conversion
- Sequence generator
- Serial to parallel converter
- Generate time delay toward digital circuits
- Data Format Converters
- Parallel data
- data transfer