CD74HCT283MTE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH FULL INTERNAL LOOKAHEAD |
| Subcategory | Arithmetic Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 49 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 80 ns |
| Family | HCT |
| Logic Function | Binary Full Adder |
| Output Polarity | TRUE |
| Logic IC Type | ADDER/SUBTRACTOR |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT283MTE4 Overview
The device is packaged in the SOICtype. For its configuration, 16terminations are used. The supply voltage of 5V enables it operate in a fully flexible way. There are a total of 16 pins in all components. As a result, it is packaged in the way of a Tape and Reel. There are 16 pins going on to connect other parts in the circuit. It is mounted in the manner of [0]. It is a member of the family [0]. There is information in the device in the form of 4bits. Among the features of this electronic device, WITH FULL INTERNAL LOOKAHEADare essential. The device is manufactured at a temperature grade of MILITARY. From the voltage source, there is a voltage of 5V volts. In order for it to operate, it requires a supply voltage of 5V . Long-term operation at 125°Cwith acceptable electrical stability is possible. An operating temperature range is specified with a lower limit generally set at -55°C degrees Celsius. The maximum voltage that can be applied to the device is 5.5V. It is possible to operate the device at as low a voltage as 4.5V. The device consumes a quiescent current of 8μA volts. In this case, the electronic components belong to the family of [0]. This device uses a logic IC type of [0]. A specified high-level voltage produces -4mAcurrent in the output. If a specified low-level voltage is applied to the output terminal, there is 4mA current flowing. 1 channels are designed to configure its basis.
CD74HCT283MTE4 Features
Embedded in the SOIC package
WITH FULL INTERNAL LOOKAHEAD
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type
CD74HCT283MTE4 Applications
There are a lot of Texas Instruments CD74HCT283MTE4 Counters & Dividers applications.
- Clocks
- Control counters
- Dual Up Counters
- Frequency division
- Signal gating
- SQUARING
- Time Out Timer for Consumer-Application Industrial Controls
- MULTIPLICATION
- VHF, UHF, FM, AM, etc.
- Divide-by"N" counters/frequency synthesizers