CD74HCT166M96G4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 40 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 60 ns |
| Family | HCT |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 20000000Hz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT166M96G4 Overview
There is an embedded device in the package SOIC. There are 16 terminations on the chip. This item is packed in case Tape and Reel. A voltage of 5V is specified for the part's operating supply. 1 elements are present in this part. 16 pins are provided on the device. Using Surface Mount as a mount point is recommended. Electronic components are categorized as HCT. It is noted that this chip uses an operating supply voltage of 5V. There are also the following additional considerations in this section: SISO OPERATION ALSO AVAILABLE. In the device, there are 9 input lines that are available for use. A voltage of 5V can be delivered by it. IC chip bits total 8. The pin count is 16. Temperatures below 125°C are recommended for use. For this device to work, it should not go below -55°C. Under 5.5V, this voltage is employed. It is used at a voltage greater than 4.5V. There is a quiescent current of 8μA flowing through it. It belongs to the subcategory of Shift Registers.
CD74HCT166M96G4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
Quiescent Current at 8μA
CD74HCT166M96G4 Applications
There are a lot of Texas Instruments CD74HCT166M96G4 Shift Registers applications.
- Serial-to-parallel data conversion
- Data Format Converters
- Interconnectors
- 7-segment display control
- Serial to parallel converter
- data manipulation
- Delay Line
- Sequence generator
- Pattern Recognizers
- Data Processors