CD74HCT107E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Function | Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 56MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 43ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 54 ns |
| fmax-Min | 56 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HCT107E Overview
It is packaged in the way of 14-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. T flip flop uses Differentialas its output configuration. There is a trigger configured with Negative Edge. Through Holeis positioned in the way of this electronic part. A supply voltage of 4.5V~5.5V is required for operation. In the operating environment, the temperature is -55°C~125°C TA. This D latch has the type JK Type. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 56MHzin the output frequency of the device. A total of 2 elements are present. As a result, it consumes 4μA of quiescent current without being affected by external factors. Terminations are 14. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 10pF farads at the input. It is a member of the HCTfamily of D flip flop. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V.
CD74HCT107E Features
Tube package
74HCT series
CD74HCT107E Applications
There are a lot of Rochester Electronics, LLC CD74HCT107E Flip Flops applications.
- Load Control
- Latch-up performance
- Asynchronous counter
- Single Up Count-Control Line
- Dynamic threshold performance
- Parallel data storage
- Bounce elimination switch
- Balanced Propagation Delays
- Power down protection
- Shift registers