CD74HC74ME4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 1 |
| Propagation Delay | 300 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC74ME4 Overview
It is packaged in the way of SOIC. A total of 2elements are contained within it. 14terminations have occurred. The power supply voltage is 4.5V. An electronic device belonging to the family HC/UHcan be found here. Surface Mount mounts this electronic component. This board has 14 pins. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 1bits is used in this application. As a result of its reliability, this D flip flop is ideally suited for TUBE. This input has 1lines. As a result, it consumes 4μA of quiescent current without being affected by external factors. It is set to -5.2mAfor the high level output current. A 5.2mAvalue is set for low-level output current. Temperatures below 125°Care ideal for operating. Ideally, the operating temperature should be higher than -55°C. Initially, it requires a voltage of 2V as the minimum supply voltage. A maximum voltage of 6V can be provided by it. This frequency can be achieved 50MHz. The logic IC it adopts is D FLIP-FLOP. It is equipped with 2 functions . It is equipped with 14 pins. The output current of 5.2mA makes it feature maximum design flexibility.
CD74HC74ME4 Features
14 pins
1 Bits
2 Functions
14 pin count
CD74HC74ME4 Applications
There are a lot of Texas Instruments CD74HC74ME4 Flip Flops applications.
- Latch
- Count Modes
- Synchronous counter
- Patented noise
- QML qualified product
- High Performance Logic for test systems
- ESCC
- Supports Live Insertion
- Convert a momentary switch to a toggle switch
- Differential Individual