CD74HC73MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | MASTER SLAVE OPERATION |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 2 |
| Propagation Delay | 160 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | JK-Type |
| Logic IC Type | J-K FLIP-FLOP |
| Max I(ol) | 0.004 A |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC73MG4 Overview
The item is packaged in SOICcases. A total of 2elements are contained within it. 14terminations have occurred. An input voltage of 4.5Vpowers the D latch. The electronic device belongs to the HC/UHfamily. This electronic part is mounted in the way of Surface Mount. This board has 14 pins. Its clock edge trigger type is Negative Edge. This part is included in FF/Latches. It is designed with 2bits. Considering the reliability of this T flip flop, it is well suited for TUBE. In order to operate, the chip has 1 output lines. It consumes 4μA current. Additionally, you may refer to the D latch's additional MASTER SLAVE OPERATION. It is set to -5.2mAfor the high level output current. The low level output current is set to 5.2mA. Ideally, the operating temperature should be below 125°C. Ideally, the operating temperature should be higher than -55°C. It operates with the minimal supply voltage of 2V. It supports the maximal supply voltage of 6V. We are able to achieve a frequency of 60MHz. It uses a logic IC with a J-K FLIP-FLOP value. It is equipped with 2 functions . 14pins are provided on the D latch. Its output current of 5.2mA allows for maximum design flexibility.
CD74HC73MG4 Features
14 pins
2 Bits
2 Functions
14 pin count
CD74HC73MG4 Applications
There are a lot of Texas Instruments CD74HC73MG4 Flip Flops applications.
- Storage registers
- Synchronous counter
- Shift registers
- Reduced system switching noise
- ESCC
- Memory
- Clock pulse
- Asynchronous counter
- Circuit Design
- Registers