CD74HC597NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 41 ns |
| Turn On Delay Time | 360 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC597NSRG4 Overview
There is an embedded device in the package SOP. 16 is the number of terminations on the chip. Tape & Reel (TR) is the case in which it is packed. There is 4.5V operating supply voltage listed on the part. A total of 1 elements can be found on this part. 16 pins are available on the device. As a general recommendation, mounting by Surface Mount is recommended. In the HC/UH series, the electronic component belongs. A range of 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. The device has 9 input lines. The total number of IC chip bits is 8. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. Operation of this device requires a value greater than -55°C. A voltage of 6V is employed as the supply voltage. It is used at a voltage greater than 2V. There is a subcategory of it called Shift Registers.
CD74HC597NSRG4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC597NSRG4 Applications
There are a lot of Texas Instruments CD74HC597NSRG4 Shift Registers applications.
- Data manipulation
- Remote control holding register
- Cache memory in CPU
- Output expansion
- data transfer
- Pattern Recognizers
- Parallel to serial converter
- Data Processors
- Sequence generator
- Flash Memory