CD74HC597E
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Base Part Number | 74HC597 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Propagation Delay | 41 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 360 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 3 |
| Input Current | 1μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC597E Overview
The device is embedded in 16-DIP (0.300, 7.62mm) package. 16 is the number of terminations on the chip. It is used to pack in Tube case. Its operating supply voltage is rated at 4.5V. A total of 1 elements can be found on this part. It has 16 pins. It is recommended that the mount should be done by Through Hole. There is an electronic component in the HC/UH. This component is mounted in the way of Through Hole. There is a range of temperatures -55°C~125°C for operation. There is a votage of 2V~6V provided with it. The 74HC series contains this electrical component. Similar parts can be found using the 74HC597 family. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. 3 input lines are available on the device. The maximum supply voltage (Vsup) for this part should not be more than 6V. A quiescent current of 8μA is used to run the device. In this device, there are 2 circuits that are active at the same time. There is 35MHz frequency set on the device.
CD74HC597E Features
With 16 pins
Mounted in Through Hole type.
Based on 74HC597 family
Quiescent Current at 8μA
CD74HC597E Applications
There are a lot of Texas Instruments CD74HC597E Shift Registers applications.
- Pulse Extenders
- Remote control holding register
- Flash Memory
- Parallel data
- temporary data storage
- Interconnectors
- Data Format Converters
- Data manipulation
- Serial-to-parallel data conversion
- Output expansion