CD74HC595SM96G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC595SM96G4 Overview
There is an embedded device in the package SSOP. 16 is the sum of the number of terminations in the chip. There is a Tape and Reel case containing it. 5V is the operating supply voltage of the part. 1 elements are present in this part. There are 16 pins on the device. Surface Mount is recommended for mounting. Electronic components fall under the category of HC/UH. In terms of supply voltage, this chip operates within the range of 5V. IC chips contain a total of 8 bits. There are a total of 16 pins on it. A temperature below 125°C is recommended for its use. In order to operate the device, the value should not fall below -55°C. 6V is the supply voltage used. This supply voltage is employed higher than 2V. It is necessary to operate 9 output lines of the system.
CD74HC595SM96G4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595SM96G4 Applications
There are a lot of Texas Instruments CD74HC595SM96G4 Shift Registers applications.
- store data in digital form
- Flash Memory
- Counter
- temporary data storage
- Dual-rank shift, hold, and bus applications
- 8-bit data storage
- Interconnectors
- Serial to parallel converter
- Serial-to-parallel data conversion
- Output expansion