CD74HC595SM96E4
| Parameters | |
|---|---|
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
CD74HC595SM96E4 Overview
In package SSOP, there is an embedded device. This chip has a total termination count of 16. The Tape and Reel case contains it. Parts with a 5V operating supply voltage are specified. A total of 1 elements are present on this part. There are 16 pins on the device. Using Surface Mount as a mount point is recommended. In this case, the electronic component belongs to the HC/UH. This chip's operating supply voltage is reported as 5V. There are 8 bits on the IC chip. It has a total of zero pins. Under temperatures below 125°C, it is recommended to use it. For this device to operate, it cannot be lower than -55°C. A voltage of 6V is used to supply this voltage. Voltages higher than 2V are used for this supply. It is necessary to operate 9 output lines of the system.
CD74HC595SM96E4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595SM96E4 Applications
There are a lot of Texas Instruments CD74HC595SM96E4 Shift Registers applications.
- Data manipulation
- Delay Line
- Cache memory in CPU
- Flash Memory
- Counter
- Dual-rank shift, hold, and bus applications
- temporary data storage
- Output expansion
- Parallel to serial converter
- LED matrix control