CD74HC595MT
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 42MHz |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Number of Outputs | 9 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 80μA |
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| fmax-Min | 25 MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
CD74HC595MT Overview
There is a 16-SOIC (0.154, 3.90mm Width) package embedded with the device. It sums up to 16 where the chip's terminations add up. The Tape & Reel (TR) case contains it. Voltage rating of the part is 5V. 16 pins are provided on the device. It is recommended that the mount should be done by Surface Mount. The electronic component belongs to the HC/UH. In Surface Mount, this component is mounted. A temperature range of -55°C~125°C is used for the operating environment. Votage is supplied within 2V~6V. In the 74HC series, this electrical component is found. If you use the 74HC595 family, you can find parts that are similar. It's noted that the chip's operating supply voltage is in the range 5V. Ensure that Vsup is not less than 2V when powering this part. In the device, there are 1 input lines. A device capable of delivering voltage at 2/6V can be used. This part should not have a supply voltage (Vsup) greater than 6V. The part is packaged in the way of TR. This device operates at a frequency of 42MHz. The part is equipped with 9 outputs.
CD74HC595MT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
Packing Method : TR
CD74HC595MT Applications
There are a lot of Texas Instruments CD74HC595MT Shift Registers applications.
- Pattern Recognizers
- Interconnectors
- Parallel to serial converter
- Data manipulation
- Serial-to-parallel data conversion
- Serial to parallel converter
- store data in digital form
- ROM Chips
- Parallel data
- temporary data storage