CD74HC595E
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 42MHz |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Number of Outputs | 9 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 3 |
| Input Current | 80μA |
| fmax-Min | 25 MHz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC595E Overview
There is a 16-DIP (0.300, 7.62mm) package embedded with the device. It sums up to 16 where the chip's terminations add up. The Tube case contains it. Its operating supply voltage is rated at 5V. 1 elements are present in this part. Devices with 16 pins are available. The recommended mounting method is Through Hole. An electronic component is included in the HC/UH. This component is mounted in the way of Through Hole. There is a range of temperatures -55°C~125°C for operation. There is a voltage supply within 2V~6V. Similar parts can be found using the 74HC family. If you use the 74HC595 family, you can find parts that are similar. A range of 5V is noted as the operating supply voltage of this chip. For this part, the minimum supply voltage (Vsup) should not be less than 2V. In the device, there are 3 input lines that are available for use. Devices with voltage delivery capabilities of 2/6V are available. In this part, the maximum supply voltage (Vsup) should not exceed 6V. 42MHz is the frequency at which this device operates. It has 9 outputs.
CD74HC595E Features
With 16 pins
Mounted in Through Hole type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
CD74HC595E Applications
There are a lot of Texas Instruments CD74HC595E Shift Registers applications.
- Delay Line
- Sequence generator
- Counter
- Dual-rank shift, hold, and bus applications
- Pseudo Random Pattern Generator
- data transfer
- Flash Memory
- ROM Chips
- Pulse Extenders
- Serial-to-parallel data conversion