CD74HC595DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC595DWRG4 Overview
As a result, SOIC package contains the embedded device. There are 16 terminations on the chip. This item is packed in case Tape and Reel. This part has an operating supply voltage of 5V. There are 1 elements on this part. The device is equipped with 16 pins. The recommended mounting method is Surface Mount. Electronic components fall under the category of HC/UH. This chip's operating supply voltage is reported as 5V. A total of 8 bits are present on an IC chip. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. In order for this device to function, the value should not be less than -55°C. A voltage of 6V is used to supply this voltage. The supply voltage is higher than 2V. It is necessary to operate 9 output lines of the system.
CD74HC595DWRG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595DWRG4 Applications
There are a lot of Texas Instruments CD74HC595DWRG4 Shift Registers applications.
- Serial to parallel converter
- Pattern Recognizers
- Dual-rank shift, hold, and bus applications
- Data Format Converters
- Data manipulation
- Serial-to-parallel data conversion
- data transfer
- 7-segment display control
- Parallel to serial converter
- Remote control holding register