CD74HC574M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 60MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 250 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HC574M Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). A package named Tubeincludes it. The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. There is an electronic component mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Temperature is set to -55°C~125°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74HC series. A frequency of 60MHzshould not be exceeded by its output. A total of 1elements are contained within it. T flip flop consumes 8μA quiescent energy. 20terminations have occurred. A voltage of 5V is used to power it. A 10pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the HC/UHfamily. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. A total of 2ports are embedded in the D flip flop. Additionally, you may refer to the D latch's additional BROADSIDE VERSION OF 374.
CD74HC574M Features
Tube package
74HC series
CD74HC574M Applications
There are a lot of Rochester Electronics, LLC CD74HC574M Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Consumer
- ESCC
- Frequency Divider circuits
- Frequency division
- Single Up Count-Control Line
- Modulo – n – counter
- Shift registers
- High Performance Logic for test systems
- Pattern generators