CD74HC4094PWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4094PWTG4 Overview
The device is embedded in TSSOP package. It sums up to 16 where the chip's terminations add up. Tape and Reel is the case in which it is packed. A voltage of 4.5V is specified for the part's operating supply. 1 elements make up this part. 16 pins are located on the device. Surface Mount is recommended for mounting. Electronic components belong to the HC/UH group. 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. The total number of IC chip bits is 8. 16 pins are on it. This product should not be used at temperatures above 125°C. This device should not be operated with a value lower than -55°C. A voltage of 6V is employed as the supply voltage. The supply voltage is higher than 2V. 10 output lines are available for operation. Its subcategory belongs to Shift Registers.
CD74HC4094PWTG4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
CD74HC4094PWTG4 Applications
There are a lot of Texas Instruments CD74HC4094PWTG4 Shift Registers applications.
- Serial-to-parallel data conversion
- data transfer
- Serial-to-parallel data conversion
- Data Format Converters
- Flash Memory
- Serial to parallel converter
- Cache memory in CPU
- Sequence generator
- 7-segment display control
- Parallel to serial converter