CD74HC4094PWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4094PWTE4 Overview
As a result, TSSOP package contains the embedded device. The number of the chip's terminations sums up to 16. It is used to pack in Tape and Reel case. Its operating supply voltage is rated at 4.5V. A total of 1 elements are present on this part. It has 16 pins. It is recommended to mount by Surface Mount in order to get the best results. In the HC/UH series, the electronic component belongs. It's noted that the chip's operating supply voltage is in the range 5V. The following additional elements are important to note: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. IC chips contain a total of 8 bits. It has a total of zero pins. Under temperatures below 125°C, it is recommended to use it. It should not be less than -55°C when operating this device. 6V is the supply voltage used. There is a voltage applied to the supply that is greater than 2V. A total of 10 output lines are available for operation. Its subcategory belongs to Shift Registers.
CD74HC4094PWTE4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
CD74HC4094PWTE4 Applications
There are a lot of Texas Instruments CD74HC4094PWTE4 Shift Registers applications.
- 8-bit data storage
- Parallel data
- 7-segment display control
- Dual-rank shift, hold, and bus applications
- LED matrix control
- Cache memory in CPU
- Data manipulation
- Remote control holding register
- temporary data storage
- Parallel to serial converter