CD74HC4094PWG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC4094PWG4 Overview
TSSOP is a package containing the embedded device. A total of 16 terminations can be found on the chip. A Rail/Tube case holds it. 4.5V is the part's operating supply voltage. 1 elements are present in this part. In this device, there are 16 pins. Using Surface Mount as a mount point is recommended. Electronic components belong to the HC/UH group. It is noted that the operating supply voltage of this chip falls within the range 5V. Taking note of the following additional details: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. It has 8 bits in total. In total, there are 16 pins on it. It should be used below 125°C. It should not be less than -55°C when operating this device. 6V is the supply voltage used. Voltages higher than 2V are used for this supply. It is necessary to operate 10 output lines. As a result, it runs at a quiescent current of 8μA. It belongs to the Shift Registers subcategory.
CD74HC4094PWG4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
Quiescent Current at 8μA
CD74HC4094PWG4 Applications
There are a lot of Texas Instruments CD74HC4094PWG4 Shift Registers applications.
- Pseudo Random Pattern Generator
- Delay Line
- data manipulation
- store data in digital form
- Data manipulation
- Output expansion
- Remote control holding register
- Parallel data
- 8-bit data storage
- Dual-rank shift, hold, and bus applications