CD74HC4094PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4094PWE4 Overview
As a result, TSSOP package contains the embedded device. 16 is the total number of terminations on the chip. A Rail/Tube case holds it. The part operates at 4.5V voltage. A total of 1 elements are present on this part. Devices with 16 pins are available. Using Surface Mount as a mount point is recommended. This electronic component is classified as HC/UH. A range of 5V is noted as the operating supply voltage of this chip. Additionally, please note the following: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. A total of 8 bits are present on the IC chip. It has a total of zero pins. Using it below 125°C is recommended. Operation of this device requires a value greater than -55°C. This supply voltage is employed under 6V. It is used at a higher voltage than 2V. Operating on 10 output lines is possible. In terms of its subcategory, it belongs to Shift Registers.
CD74HC4094PWE4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
CD74HC4094PWE4 Applications
There are a lot of Texas Instruments CD74HC4094PWE4 Shift Registers applications.
- Counter
- Data manipulation
- Serial-to-parallel data conversion
- 8-bit data storage
- temporary data storage
- Remote control holding register
- Pattern Recognizers
- store data in digital form
- Data Format Converters
- 7-segment display control