CD74HC4094MTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 2V |
| Max Supply Voltage | 6V |
| Propagation Delay | 33 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4094MTE4 Overview
The device is embedded in SOIC package. A total of 16 terminations can be found on the chip. It is packed in a case number Tape & Reel (TR). A voltage of 4.5V is specified for the part's operating supply. There are 1 elements on this part. 16 pins are available on the device. It is recommended that the mount should be done by Surface Mount. In the HC/UH series, the electronic component belongs. A range of 5V is noted as the operating supply voltage of this chip. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. This part should have a minimum supply voltage (Vsup) of at least 2V. 16 pins are present on it. It should be used below 125°C. This device should not be operated with a value lower than -55°C. Under 6V, this voltage is employed. It is necessary to operate 10 output lines. In terms of its subcategory, it belongs to Shift Registers.
CD74HC4094MTE4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
CD74HC4094MTE4 Applications
There are a lot of Texas Instruments CD74HC4094MTE4 Shift Registers applications.
- Cache memory in CPU
- Delay Line
- Pseudo Random Pattern Generator
- Data Format Converters
- data transfer
- LED matrix control
- Parallel to serial converter
- Interconnectors
- Pulse Extenders
- Serial-to-parallel data conversion