CD74HC4094MT
| Parameters | |
|---|---|
| Schmitt Trigger | No |
| Number of Input Lines | 1 |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC4094 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | AND, Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 160μA |
CD74HC4094MT Overview
There is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). Taking the total number of terminations on the chip and adding them up, we get 16. The Tape & Reel (TR) case contains it. Voltage rating of the part is 4.5V. 16 pins are available on the device. It is recommended that the mount should be done by Surface Mount. In the HC/UH series, the electronic component belongs. Mounting of this component is indicated by Surface Mount. A temperature range of -55°C~125°C is used for operation. Votage within 2V~6V is supplied. The 74HC series represents this electrical component. Search for similar parts based on the 74HC4094 family. As noted, this chip operates within the range of 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. As far as the device is concerned, there are 1 input lines available. Voltage can be delivered at 2/6V by the device. The maximum supply voltage (Vsup) for this part should not be more than 6V. Operation is available on only 10 output lines. A quiescent current of 8μA is used to run the device. TR is used to package the part. The device runs at 60MHz.
CD74HC4094MT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC4094 family
Operate supply voltage at 5V
It supplies 2/6V power
With 10 output lines
Quiescent Current at 8μA
Packing Method : TR
CD74HC4094MT Applications
There are a lot of Texas Instruments CD74HC4094MT Shift Registers applications.
- Data Processors
- ROM Chips
- Pulse Extenders
- Pseudo Random Pattern Generator
- Parallel data
- 7-segment display control
- Flash Memory
- Output expansion
- data transfer
- Sequence generator