CD74HC4094MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 295 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC4094MG4 Overview
SOIC package contains the device. This chip has a total termination count of 16. Parts with a 4.5V operating supply voltage are specified. There are 1 elements on this part. There are 16 pins on the device. Using Surface Mount as a mount point is recommended. In this case, the electronic component belongs to the HC/UH. In terms of supply voltage, this chip operates within the range of 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. It has 8 bits in total. 16 pins are on it. Using it below 125°C is recommended. It should not be lower than -55°C to operate this device. This supply voltage is employed under 6V. This supply voltage is employed higher than 2V. Operating on 10 output lines is possible. A quiescent current of 8μA is used to run the device. It belongs to the subcategory of Shift Registers.
CD74HC4094MG4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
Quiescent Current at 8μA
CD74HC4094MG4 Applications
There are a lot of Texas Instruments CD74HC4094MG4 Shift Registers applications.
- Sequence generator
- Output expansion
- Parallel data
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Remote control holding register
- Pattern Recognizers
- Counter
- data manipulation
- Generate time delay toward digital circuits