CD74HC4094M96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4094M96E4 Overview
There is a SOIC package embedded with the device. 16 is the sum of the number of terminations in the chip. Presented in a case of Tape and Reel. The part's operating supply voltage is rated 4.5V. There are 1 elements on this part. Devices with 16 pins are available. The mounting method should be Surface Mount. Electronic components fall under the category of HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. The total number of IC chip bits is 8. This board has 16 pins in total. A temperature below 125°C is recommended for its use. Operation of this device requires a value greater than -55°C. It is employed under the condition of 6V. It is used at a higher voltage than 2V. There are 10 output lines to operate. In terms of its subcategory, it belongs to Shift Registers.
CD74HC4094M96E4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
CD74HC4094M96E4 Applications
There are a lot of Texas Instruments CD74HC4094M96E4 Shift Registers applications.
- Cache memory in CPU
- Delay Line
- Serial-to-parallel data conversion
- Dual-rank shift, hold, and bus applications
- LED matrix control
- Pulse Extenders
- store data in digital form
- Pattern Recognizers
- data manipulation
- temporary data storage