CD74HC4094M
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Base Part Number | 74HC4094 |
| Function | Serial to Parallel |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Propagation Delay | 295 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | AND, Latch, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 3 |
| Input Current | 1μA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4094M Overview
16-SOIC (0.154, 3.90mm Width) package contains the device. The number of the chip's terminations sums up to 16. This item is packed in case Tube. There is 4.5V operating supply voltage listed on the part. It is a part that has 1 elements on it. 16 pins are located on the device. The mounting method should be Surface Mount. In the HC/UH series, the electronic component belongs. Mounting of this component is indicated by Surface Mount. It is important to note that the operating temperature range is -55°C~125°C. There is a voltage supply within 2V~6V. This electrical component belongs to the 74HC series. If you use the 74HC4094 family, you can find parts that are similar. Taking note of the following additional details: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. The device has 3 input lines. A maximum supply voltage (Vsup) of 6V may be applied to this part. A quiescent current of 8μA is used to run the device. In this device, there are a total of 2 circuits. The device runs at 60MHz.
CD74HC4094M Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC4094 family
Quiescent Current at 8μA
CD74HC4094M Applications
There are a lot of Texas Instruments CD74HC4094M Shift Registers applications.
- Generate time delay toward digital circuits
- ROM Chips
- Serial-to-parallel data conversion
- Delay Line
- Pattern Recognizers
- Remote control holding register
- Pulse Extenders
- Cache memory in CPU
- Output expansion
- store data in digital form