CD74HC4094EE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4094EE4 Overview
PDIP package contains the device. The number of the chip's terminations sums up to 16. Presented in a case of Rail/Tube. 4.5V is the part's operating supply voltage. There are 1 elements on this part. 16 pins are located on the device. It is recommended to mount by Through Hole. In the HC/UH series, the electronic component belongs. It is noted that the operating supply voltage of this chip falls within the range 5V. Additionally, please note the following: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. It has a total of 8 pins. In total, it has 16 pins. At temperatures below 125°C, it is recommended for use. Operation of this device requires a value greater than -55°C. A voltage of 6V is used to supply this voltage. This supply voltage is employed higher than 2V. The number of output lines to be operated is 10. Shift Registers is its subcategory.
CD74HC4094EE4 Features
With 16 pins
Operate supply voltage at 5V
With 10 output lines
CD74HC4094EE4 Applications
There are a lot of Texas Instruments CD74HC4094EE4 Shift Registers applications.
- Serial to parallel converter
- Delay Line
- Pulse Extenders
- Pseudo Random Pattern Generator
- data transfer
- Generate time delay toward digital circuits
- Dual-rank shift, hold, and bus applications
- Parallel data
- Remote control holding register
- Data Format Converters