| Parameters |
| Technology |
CMOS |
| Voltage - Supply |
2V~6V |
| Terminal Position |
DUAL |
| Supply Voltage |
5V |
| Function |
Serial to Parallel |
| Qualification Status |
COMMERCIAL |
| Output Type |
Tri-State |
| Number of Elements |
1 |
| Supply Voltage-Max (Vsup) |
6V |
| Supply Voltage-Min (Vsup) |
2V |
| Family |
HC/UH |
| Output Characteristics |
3-STATE |
| Logic Type |
Shift Register |
| Output Polarity |
TRUE |
| Number of Bits per Element |
8 |
| Trigger Type |
POSITIVE EDGE |
| Propagation Delay (tpd) |
295 ns |
| fmax-Min |
60 MHz |
| Count Direction |
RIGHT |
| RoHS Status |
Non-RoHS Compliant |
| Mounting Type |
Through Hole |
| Package / Case |
16-DIP (0.300, 7.62mm) |
| Surface Mount |
NO |
| Operating Temperature |
-55°C~125°C |
| Packaging |
Tube |
| Series |
74HC |
| Part Status |
Obsolete |
| Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
| Number of Terminations |
16 |
| Additional Feature |
PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT |
CD74HC4094E Overview
This device can be found embedded within the package 16-DIP (0.300, 7.62mm). 16 is the total number of terminations on the chip. Presented in a case of Tube. 5V is the operating supply voltage of the part. A total of 1 elements are present on this part. The electronic component belongs to the HC/UH. In Through Hole, this component is mounted. -55°C~125°C is the operating temperature range. Votage within 2V~6V is supplied. 74HC is the series number of this electrical component. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT. There should be no voltage less than 2V at the minimum supply voltage (Vsup). This part requires a maximum supply voltage (Vsup) of 6V.
CD74HC4094E Features
Mounted in Through Hole type.
CD74HC4094E Applications
There are a lot of Rochester Electronics, LLC CD74HC4094E Shift Registers applications.
- Parallel data
- store data in digital form
- Data Processors
- LED matrix control
- ROM Chips
- Sequence generator
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Counter
- Serial-to-parallel data conversion